Jfosiyo Stud Finder Wall Scanner 5 In 1 Multi Function | Desertcart Switzerland
JFOSIYO Stud Finder Wall Scanner, 5 IN 1 Multi-function Wall Detector for Stud Sensor/Metal/AC Wires/Wood Finder, with Distance Measuring and Laser Level Class II Max Power ¡Ü 1mw
3.6/5
Produkt-ID: 162594996
Sichere Transaktion
Häufig zusammen gekauft
Beschreibung
?¡¾3 modes Multi-Functional Wall Finder¡¿The stud detector adopts the latest sensors technology to locate edge & center finder behind ceiling, floor and wall.*FOR DRYWALL/LATH/PLASTER ¨C SCAN wood beam/stud/metal/rebar/AC wire/copper pipe;*FOR TILES ¨C SCAN stud/metal/rebar/copper pipe; ¡°STUD SCAN¡± mode ¨C detecting depth up to 0.94 inches (24mm); ¡°METAL SCAN¡± mode ¨C detecting depth up to 1.18 inches (30mm); ¡°AC SCAN¡± mode ¨C detecting depth up to 1.97 inches (50mm).
?¡¾Ultrasonic Distance Measure & Additional Multiple Measure¡¿ If the distance to be measured is greater than 16 meters, the additional further measurements function can be used. It provides non-contact measuring and automatic conversion between imperial and metric unit of measurement. It equipped with a laser pointer to identify the target for additional verification of testing point. *Measuring distance: 0.5m ~ 15.2m; *Wavelength: 635nm ~ 670 nm; *Accuracy: ¡À1% of reading.
?¡¾Auto Calculation of Area & Volume¡¿ It can take measurement of distance, calculation of area and volume. After the length figure and the width figure are measured in meters or feet and showed on LCD screen, the area value will be calculated and immediately displayed along with the square unit. After the length figure, the width figure and height figure are measured in meters or feet and showed on LCD screen, the volume will be calculated and displayed along with the cubic unit.
?¡¾Laser Level¡¿ Set the tool to Laser Level function section by pushing the switch knob to the Laser position. *Laser class: Class II, maximum power out¡Ü1mW; *Accuracy: ¡Ü0.15 degree; *Best viewed distance: ¡Ü5m.
?¡¾Visual LCD Display & Auto Power Off¡¿ The LCD display is a user-oriented design which provides clear indication of function and performance. It is backlit and shows the working environment temperature. Also it has an auto-off function to extend the battery life. When the battery is close to empty, the low battery icon will begin to flash. *Optimum operation temperature range: -2¡æ - 45¡æ; *Optimum operation humidity: 60% RH; *Auto shut off: 30 seconds after last key stroke.
›See more product details
JFOSIYO has a professional team to be dedicated to design and produce multi-function measurement tools. We can provide you 24 month warranty and superior after-sales service. Please feel free to contact us if any questions! This instrument integrates MULTIPLE MEASUREMENT, DIGITAL STUD FINDER and LASER LEVEL by pushing a shift switch to set any one of functions. It is an ideal measuring tool for DIY homework and professional work task. MEASUREMENT CAUTION: 1. Do not move the unit during measuring. 2. Taking measurements through glass are not possible. 3. Taking measurements on sound-absorbing surfaces are not possible. 4. Wind can lead to faulty measurements. 5. Pay attention to obstructions between the measuring tool and the target surface. 6. When approaching the max measured distance, actual measurements may have some errors. WALL SCANNER DETECTOR CAUTION: 1. Please remember that studs or joists are normally spaced 406mm or 610mm apart and 38mm in width. Anything closer together of a different width may not be a stud, joist or rebar. 2. Anytime when you find a stud, use AC detecting mode to verify it is a hot wire or not. 3. When ¡°lighting¡± symbol shows on the LCD screen, that means there is hot wire nearby, do not work in this area. 4. Always turn off power when working near electric wires. 5. To avoid interference, keep your free hand and other objects at least 6in.(15cm) away from the tool. 6. The detected edges may be wider than the actual stud edges. LASER LEVEL CAUTION: 1. Do not stare your eyes to the laser beam. 2. Never aim the beam at any person or an object other than the work piece. 3. Always align the bubble vial in middle position when using laser level function. 4. When use in daytime, be sure to close the curtain.
Häufige Fragen
TrustPilot
TrustScore 4.5 | 7.300+ Bewertungen
Rajesh P.
Der Kundenservice war hervorragend, als ich Fragen zum Produkt hatte.
vor 2 Tagen
Sarah M.
Sehr beeindruckt von der Qualität und der schnellen Lieferung. Werde hier wieder einkaufen.
