AC Infinity AIRLIFT T10, Shutter Exhaust Fan 10" with WiFi Temperature Humidity Controller, EC-Motor Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops, and Greenhouses

I have an 18x10 shed that has a storage area on one side and a built in workshop on the other. It was getting very hot in the summer. Luckily, the shed had gable vents on each side, so I cut out one of them and installed the vent in the opening. I wired everything and it worked like a charm. The controller/thermostat was confusing to set up but the phone app and Bluetooth are fantastic. I could set up all the settings from the app and the interface was very intuitive. So. I actually set up the temp and humidity settings for the fan to automatically come on directly from the app-super easy. And the fan is relatively quiet and adjusts speed as needed. Yes, you can hear it running, but it isn’t a nuisance and considering how much cooler my shed is, I don’t really even notice! In fact, when I was showing off the shed to my brother in law, he couldn’t believe how the shed wasn’t that hot, and then I showed him the fan! Great product, easy to install, quiet, and the app is fantastic!

This fan is amazing. Bought it for the purpose of clearing the air out of my garage. I smoke and it does exactly what I needed. Clears 450 sq ft of space in 3 minutes or less. I cut a hole in my upper garage door panel and installed it and it’s not too heavy and does a great job. I have had this fan over 4 years and have had zero problems. Sometimes running it 24 hours a day for several days at a time. It’s gonna make noise. It’s a fan. It has ten settings and is loud in my opinion after setting 5. It’s worth the noise to do whatnot does. It will also reduce the temperature by a few degrees as well as the humidity by as much as 5-6 degrees. I have a more modern garage as a note but if you seal up around the doors and insulate the doors you’ll have great results. You’ll thank me later.

Bought it in preparation to exhaust air from my two car garage in the summer months. Prior to knowing this fan existed (stumbled onto it by mistake) I initially bought the typical 12” galvanized shutter exhaust fan to pair it with an Inkbird temp and humidity controller but found out the stud spacing above my garage side door was only 14” wide. The 12” fan was 14.5” wide so I had to return it as it wouldn’t fit.While searching for a 10” model exhaust fan, I found this AC infinity with built in temp and humidity controller which works great and looks sleeker IMO to the galvanized fan!Installation was a breeze once you cut out the appropriate hole in the wall. Air Movement is great in level 5 (out of 10) for my 2 garage space (290 sq ft) with minimal noise. A fan speed of 10 is fairly loud like a huge box fan but does also move lots of air at that speed too.Will have to wait till summer to see how much cooler it gets and how much humidity it can exhaust outside.One minor negative is the sides and top of the shutter has gap of 1/4” or so. I had to use some different thickness of one sided foam tape to fill in the gaps while still allowing the shutters to open freely. Now the gaps are 1/8” or less.Overall, I’m happy with the initial purchase but wish they had a model with WiFi controllability. I will gladly pay $40 on top for that as an optional feature. Also, maybe have a programability mode to set schedule for days (M-Su) and hours when the fan can kick on/off will be cool too!Nice job AC Infinity

I installed this fan around a week ago for my attic and so far so good. I like the quality of the fan, the touch interface and the app. I like being able to set it so that the fan turns on when either a certain humidity level or high temperature level is reached in the attic. The louver blades didn't fit the triangular gable vent in my attic so I removed it and mounted the fan to a custom triangular board that I made. I especially like that the fan runs quiet and we don't hear it from the room below where it is mounted. Being able to adjust the settings via a mobile app on my iphone is a nice feature too.

I purchased this for a greenhouse project my wife wanted. The greenhouse is a 10 ft x 12ft x 7ft heavy plastic dome type with a wooden front and the back is attached to the siding of the house.My wife installed a vapor barrier made of bubble wrap approximately 6" - 10" away from both clear sides and the top. This dropped the interior area down very close to the rated 630 cfm airflow for the 10" fan.Although the fan controller seems to work very nicely in mid-range temps -but when it is upwards of 80+ deg F with direct sun she is having issues keeping the temperature and humidity where she would like them to be. I wish I would have gone with the 12" or 14" series and it would most likely be just right for the application. I'll probably try to go with one of the larger ones for the main exhaust and install the smaller 10" one as a push fan through a basement window which can be opened up into the greenhouse. The listing says the controller is capable of operating two fans so that may resolve the issue.Overall I'm impressed with the product. It appears well-built and the bluetooth app controller is very responsive and accurate which is a great feature. My advice would be to calculate your overall area and purchase one for a 30% or so larger CFM capacity rating than the area you're working with.ADDITIONAL NOTE: If any sales reps for AC Infinity would like to help me with a discounted fan-only deal (no controller) on the larger fan purchase it would be welcomed and appreciated.

Cools the coop off by 15 to 20 degrees. 92 degrees outside and the coop was 79 degrees inside! So much more comfortable for the girls and us. Very quiet! Delivery was quick and well packed. The installation was as expected.