Spigen Tough Armor TECH Designed for Apple iPhone 6S Case (2015) / Designed for iPhone 6S Case (2014) - Gunmetal

Awesome case from an awesome company! I've recently became a fan of Spigen after getting fed up with bulkiness of Otterbox cases and how quickly they cases wear out and look terrible after just a month or so of use. I didn't want to deal with plastic screen protectors any more either since they're easily scratched so I decided I wanted a case that was slim (I got really tired of the bulkiness of the Defender), protective (for those normal, accidental drops), and allowed enough clearance to install a glass screen protector (to prevent most scratches).After trying different cases the Spigen Tough Armor Tech (hereby referred to as TAT) case is best one I've found for me. It doesn't add a lot of bulk to the iPhone 6S; there's a little but honestly I don't feel that it's much considering the amount of protection you're getting in return. This case is a good trade-off between sleekness and protection. It's "grippy", so I never feel like I'm going to drop it by accident. The edges of the TAT case aren't sharp either making it very comfortable to hold. If you're someone like me who "fidgets" a lot with their phone (i.e., idly holding it and moving it around when you're bored) then this case would be perfect for you.The corners of the TAT case are thicker than on your standard slim cases so, at least in my opinion, they offer better protection for those drops that end with a corner of your iPhone taking the majority of impact. I've seen from multiple YouTube videos where "phone corner" drops, besides maybe the "face down" drops, tend to damage smartphones the most. There's enough lip on the case to allow a screen protector (I have a glass screen protector on my iPhone 6S that just covers the actual screen, I'm not sure how well an "edge to edge" one would work with this case since the case wraps around the edges of the phone a bit) to be installed and still be raised up enough so that the screen doesn't touch a flat surface like a desk to (hopefully) avoid scratches when placing the phone face down. Overall the case is very well constructed and honestly shows no to very little wear over time. My case, though I've continually used it over 6 months and had never taken it off, looks the same as the day I first put it on. There's no way I could say that about my Otterbox. I'll admit I'm very nit-picky about that sort of thing.As far as cons go, there aren't that many. If you're someone who likes to swap out cases a lot I will say that the TAT case is a major pain to remove. For me at least, it's a very difficult process to remove the backplate from the TPU sleeve. Maybe there's a method I'm not aware of that would make the process easier. You might be able to remove the phone from the case with the backplate still attached, I haven't tried that yet as I generally don't swap out cases that often (which I never do now after getting this one). Another issue was that at the time I was researching new cases I thought that this case would be compatible with the Spigen holster (yeah I know I'm that guy with the iPhone attached to his belt; I don't care how uncool it is I hate having lint and possibly scratches all over my phone by shoving it in my pocket). Unfortunately, due to the size of the corner bumpers of the TAT case it isn't compatible with the holster. So I went to Bass Pro and picked up an even less cool Nite-Ize velcro holster.One other con I had actually was resolved by Spigen (which is one reason I called them "awesome" a few paragraphs up). I just happened to notice that Spigen redesigned this case sometime recently and made a few very cool adjustments. One thing they did was increase the size of the forward facing audio speaker cutouts so that the sound was clearer. The other "major" change was that the nubs (I'm going to call them that anyway) on the back of the TPU that hold the backplate in place are longer, so the phone when resting on its back actually rest of the nubs instead of the backplate, making the phone less likely to slip around on a flat surface.My original TAT case was purchased after this redesign, so the audio speaker cutouts on mine were much smaller (and way more prone to audio muffling at higher pitch sounds) and the case rested on the backplate which is much slipper than the TPU nubs. These weren't that big of a deal, but I contacted Spigen anyway to see what they'd say. I figured they would tell me I'd have to purchase another case if I wanted the redesigned model. They contacted me back quickly and requested a photo of my case, which I replied back with as well as mentioning that I really liked the case, I just wanted to see if they could do something like give me a discount code or something so I could get the redesigned one. The replied promptly letting me know that they received the photo and since I had the previous model case they would send my a whole new case, free of charge! That was really awesome of them and very unexpected. So, needless to say I'm a big Spigen fan now. I got the new case installed and it's great. I'm not going to guarantee you'll get the same level of support I did, I may have just gotten lucky, but it's something I want to share about them and how they took care of me.If you're interested in seeing the differences, I've added some photos to this review. I'll apologize ahead of time for the picture quality, the lighting at our home was really bad the night I took them.I realize isn't an Otterbox and I don't expect that I can throw my phone out of a 3rd story window and it not suffer any damage using this case. But for day to day normal use this is a fantastic slim case. It's very well constructed and holds up extremely well over time with little to no wear. I highly recommend the Tough Armor Tech case from Spigen!

There are many, many great cases available for the iPhone 6s, and I own a few, all of which excel in form, function, protection, & good looks. But, this Spigen Tough Armor Tech does everything just a bit better!! First, although all the others have precise fitting, the fit of the Spigen is impeccable, making the volume & sleep buttons much more responsive than on any of my other cases. Also, this is the only case I could find with full port protection (without having a built-in screen protector). This was important to me because I use my phone outside a lot, taking photos, and I did not want an additional screen protector over the excellent glass one I already have installed. And I wanted those ports protected from debris in case I should drop the phone. The Spigen's coverings over the ports (charging & headphone jack) at the bottom of the phone work very smoothly and are so precise that they almost reinsert themselves into the port when done. Just need a little push with your thumb to fasten. So, those being my most important considerations, and having them fulfilled so well, this would probably be my Go-To case, no matter what it looked like. But, this case has the rare ability to mix "brains" with beauty! The hi-tech design, instead of being clunky & bulky, is slim with enough body & texture to prevent slippage and give it a secure grip. And the brushed metallic finish is downright classy!! It lays flat, either side, and has enough weight to prevent it from being knocked off a table, too!

This was an easy 5 star rating. While I sometimes neglect to leave reviews.. for a myriad of reasons, I felt compelled to submit my feedback on this case. I tried 2 others before this, the ESR Shielder and the Obliq Skyline Pro, and the Spigen is far superior, hands down. The 6s fits perfectly and snugly inside; the buttons are very tactile and crisp, and there is no play or unwanted movement in them; all of the materials feel good to the touch; the dust covers fit tightly and stay in; the front facing speaker works well and seems to even enhance the volume/sound quality; the ergonomics are superb - holding my phone with this case compared to the other two feels so much better... it feels like a lot of thought and care went into the design, something lacking in so many lower priced cases on the market today; It's considerably slimmer than the other 2 cases I tried, but I am confident that the claims maintaining the slim design doesn't sacrifice protection are accurate - I wanted to avoid a slim case, but it really works for this one and is part of the reason it feels so good and ergonomic in the hand. The Spigen Tough Armor Tech is sleek and beautiful. Nothing on it looks or feels cheap. What felt cheap to me were the other 2 cases after I'd tried the Spigen. From someone who thoroughly researches products before making a purchase and therefore appreciates accurate reviews - trust me - the Spigen is well worth the price increase over a plethora of cheaper made cases currently being sold on the internet. Afterall, you're handling the phone/case all day every day, so what's $10 or $12 for a significant jump in quality? I forgot to mention that I had the Spigen Tough Armor case on my 5s for 2 years before I upgraded. It was an excellent case as well, but I already like this one quite a bit more. Shop around, I do; but you won't be disappointed should you buy this case.

Robuste aber auch leicht klobige Hülle, schützt super, ist aber etwas sehr groß

J ai enfin réussi à trouver une coque pour iPhone digne de ce nom. Vraiment de très bonne qualité et au top niveau protection. Je conseille et re- reconseille

Bella, robusta, utile. Dona al mio iphone quell’aspetto “rugged” di alcuni PC. Ben protette anche il jack per le cuffie e l’attacco per il cavo lightning.Consiglio l’acquisto così tanto che ne ho preso uno anche per il mio iPhone 6 Plus

Ich hatte vorher immer nur OTTER Schutzhüllen für mein iPhone und wollte eigentlich wieder eine für meine neu erworbenes iPhone 6 bestellen. Aber die Rezensionen für die OTTER Hüllen lasen sich nicht so gut und die dort beschriebenen Erfahrungen deckten sich zum Teil auch mit den meinen. In einer dieser Rezensionen schrieb einer, er hätte sich deswegen eine Hülle von Spigen zugelegt.Also hab ich mir die Auswahl von SPIGEN (hatte ich vorher noch nie gehört) angesehen und mir die SPIGEN Tough Armor Tech "Silber" bestellt.Das Ding sitzt wie ein Schuh an dem iPhone und schützt auch alle Zugänge zuverlässig. Es besteht aus robustem Material das aber in gleichem Atemzug nicht wirklich "aufträgt" und das iPhone klobig oder unhandlich wirken lässt.Mit den Karbon-Optik Einlagen und der metallisch wirkenden rückwärtigen Verstärkung sieht die Hülle noch besser aus als es die Bilder übermitteln. Ich bin super happy damit und kann diese Hülle für den aktuellen Preis von 14,95€ mehr als nur empfehlen. KLASSE PRODUKT!!!

superbe coque allant parfaitement à mon iphone 6, superbe qualité très beau rendu, les parties carbone sont de très haute qualité, elle a l'air très solide