🔩 Upgrade your ride’s rear hatch with precision and peace of mind!
This Rear Window Liftgate Glass Hinge Set is a direct OEM replacement designed for Ford Escape (2008-2012), Mercury Mariner (2008-2011), and Mazda Tribute (2008-2011). Manufactured by SEINECA, it includes both right and left hinges, screws, and gaskets for easy installation without special tools. Built from premium materials, it ensures durability and proper rear window operation, backed by a 24-month warranty for reliable performance.
Manufacturer | SEINECA |
Brand | SEINECA |
Item Weight | 13.7 ounces |
Package Dimensions | 7.52 x 4.21 x 2.64 inches |
Item model number | BCT001 |
Manufacturer Part Number | BCT001 |
D**H
Perfect fit and good looking
My hinges were loose and corroded so I bought these to fix the problem. It was an easy install and they look and work great. Note they give you 2 foam gaskets in the kit they go on the bolts that come through the hatch sheet metal
S**3
2012 Ford Escape rear hatch hinge
Worked great on my 2012 Ford Escape.
A**R
Better than factory
Used on a 2009 and 2011 FOrd Escape:They are fully coated on the underside (unlike factory units) and should last longer. Perfect fit. No instructions so here you go... videos on youtube, as well.Release the shocks on the glass. Do one hindge at a time to help hold the position of glass. I also used duct tape around the glass for extra insurance and I'm glad I did. The bolts on the glass can be tricky. Use penetrant and take your time. If that fails, you can drill them out (they are just aluminum - 13/64 then chase it with 1/4 - the top spins right off).The parts come with two sets of foam washers. Use both sets to fill the gap around the bolt on the glass. You may have to clean out the hole in the glass from peterfied material - it almost seemed like a plastic washer but alas, it will come out. If you don't it will not tighten down properly. You should have a clean hole through the glass. 96 INCH/lbs torque spec on both bolts. Note the plug that attaches the wiring harness (passenger side) is held in place by a small tab at the 9 and 3-o'clock positions. It will release with the rubber cover intact. Use a small screwdriver to reach the tabs. Finally, I used blue loctite on the threads. The hardest part is removing the bolts on the glass otherwise very easy job.
D**H
Cheaper than the dealership!
So much less on Amazon. The dealer wanted to charge me so much more! Everything has been fixed. I am happy with the product!
R**.
Good value for the price
Fairly sturdy and heavy, better quality than what I expected. Install was fairly easy, the only issue was the removal of the old hinges, which is not the fault of these hinges obviously. I will say the extra rubber washers confused me, without any install instructions. I installed the first one with only one rubber washer on the window bolt, and it was very loose, too loose actually. I ended up having to take it all back apart and reinstall with a second rubber washer before it was snug enough not to rattle. After the first side, it was fairly easy on the second. Be sure to use plenty of penetrating oil on the old stud through the window, and remove the original plastic shield on the outside, it will easily cause the bolt to bind and could break the glass. They fit nearly as good as original. Also, be sure to clean surfaces thoroughly before installing these, any grit, dirt or leftover corrosion could damage the glass. Remove the shocks on the glass, it can cause alignment issues. Really only complaint is the lack of instructions, but easy to find online how to's, except no one mentions anything about the extra rubber washers.
C**L
Great Quality
Fit perfect!!
B**A
Es de metal resistente
Lo recibí es de muy buen material y meLlegó igual a lo que necesitaba
K**
Exactly what I needed
This was exactly what I needed for my 2012 Ford Escape. Mine were corroded horribly!
TrustPilot
vor 2 Tagen
vor 2 Wochen
vor 3 Tagen
vor 3 Wochen