Project S Large Drawer Case ATX Mid Tower HTPC with Tempered Glass, Aluminum Front Panel and RGB LED Bar, Silver

Fantastic looking case. The drawer feature is neat but not really practical. It would only work best if you have long cables or lots of desk space since the drawer is on wheels and if you pull too far without space it would fall and also the cables connected to the back of the case would need to be long if you want to pull it out and still have the PC running.This case is bigger than your average mid tower. Calling this an HTPC is also a stretch since it takes a lot of room, not sure why you would need such a big case as an HTPC.Building in the case was fairly easy, cable management is easy with lots of routing and cable ties. I would think they would at least give us higher quality/quantity fans based on priced, so that is a bit disappointing.If you want the full 8 fans in the case you will have to take out the modular drive cage which reduces your total capacity of drives to 3 x 2.5"If you have a plastic/rubber noise prevention pad on your PSU like mine did (be quiet dark power 11), you will have to take it off or take off the included foam pad for the PSU since the screws aren't long enough.Lots of airflow and dust filters everywhere. You can definitely fit a 360mm radiator on the right or top (depending how you orient your case). I was able to put an Alphacool Eisbar 360 AIO in there. Depending on the size of the radiator it might obstruct some things like RAM height. I was also able to install a Dark Rock Pro 3 without any restrictions.I like the LED bar and the USB C on the front. Nice power and reset button.

4 stars because it probably won't fit in your current entertainment center but that is okay! There are plenty of entertainment centers (i'm going with whalen) that make this work. I'm in the process of doing my first htpc build. The competition may present smaller receiver like sizes but you will pay $400 or more for the convenience. That extra money can mean the difference between some building vs not building.It presented a quality look and feel right out of the box. I like the big over the top look and the RGB light on the front. Probably everyone that comes to your house and watches tv will ask "what is that thing" lol.This would be perfect to pair with a corsair lapdog or a nerdytec couchmaster.*UPDATE the pull out drawer concept was brilliant. My wifi in the living room isn't that good but it is fantastic where the router is. I may go with a TP link solution soon but in the interim I have pulling the drawer out and downloading large games like Forza 7 right beside the router lol*Nanoxia if you are reading this adding a slimmer model would appeal to a larger audience. There are people like me who would move hell or high water to get this thing in their living room. But if you cut down the height by a couple of inches I believe this would sell like hotcakes.

I'm very happy with this case! The drawer design gives this case an innovative distinction other cases lack. I can simply pull the drawer out instead of having to remove every panel just to install or remove one part. The cable management is excellent and the cables are easily hidden away once the drawer is placed back in the outer shell, minimizing any appearance of a "rat's nest" you're likely to see in other cases. It can stand like a tower or lay flat like HTPC, giving it extra versatility. While it lacks a bay for an optical (CD/DVD) drive bay, you can plug in an external one via USB port if you burn a lot of CD's/DVD's. I also like the light bar on the front of the case and most of the colors look great with the black surface, my favorite two colors are red and green. My only real complaint is the USB-C extension cable attached to the front panel. I would have prefered the opposite end have a motherboard connector instead of the male connecter it comes with. Easily fixable with this cable:  Cablecc USB 3.1 Front Panel Header to USB-C Type-C Female Extension Cable 40cm with Panel Mount Screw , so now its connected directly to the motherboard internally, instead of running out of the back of the case to be connected to a port on the back panel. I got it hidden underneath the hardware mounting plate and covered the hole on the back of the case with a black hole plug I bought at a local hardware store to improve the aesthetics. While not "perfect", its definitely the best case I've ever owned.

I sent this case back due to it's very large size. It's BIG.. great features and enough room for anything you could possibly want to put in it, however unless you have an excess amount of space it my not be the case for you. If Nanoxia would make a trimmed down version of this, say around 17x17x8 and loose the slide out. It would be way more practical.

Plenty of room for any build. Easy access to clean parts regularly. I highly recommend this case even at the premium price.USB-c is a cable that runs from front to back and plugs into your Mobo. Wish I had two more inches in length to the cable.

The case looks nice, although the drawer feature isn't as useful as advertised. But the shoddy materials and junk construction, coupled with some of the worst customer service I've ever seen, make this nothing but an expensive headache. You're better off with one of the htpc cases from Silverstone, trust me.

Great quality and very easy to assemble.

Lange hab ich mit mir gerungen das Case zu kaufen, da der Preis schon ordentlich ist. Doch da es sich von den Abmessungen her gut in meinen Schreibtisch integrieren lässt und ich ein Gehäuse wollte das nicht gleich aussieht wie jedes andere, hab ich es letztendlich doch bestellt.Als der Paketbote da war bekam ich ein Riesenpaket in Format eines grossem Miditowers, und mit 15 Kilo auch schon schwerer als einer. Der Inhalt des Pakets war gut verpackt. Jede Menge Schaumstoff. Obwohl ich mir den Aussenmaßen stark bewusst war, wirkte er nach dem auspacken wuchtiger und grösser als vermutet.Der Einbau der Komponenten verlief spielend einfach, da sich dabei alles in der Schublade abspielt. Zwar muss man die Lade des öfteren aufstellen und hinlegen aber man erreicht alle Stellen ohne Probleme und man merkt dabei dass, die Verarbeitung schon sehr hochwertig ist.Mein Mainboard mit dem ATX Form Faktor bei 30,5 cm * 22,1 cm wirkt dabei sehr verloren und ich fragte mich wie das erst bei einem Mini-Itx aussehen muss. Um mir auch selber die Frage zu beantworten ob denn auch ein sehr voluminöser CPU Kühler wie der Brocken 2 von Alpenföhn reinpasst, kann ich im nachhinein sagen ,,LOCKER,,. Den vorinstallierten Abluftfan hätte ich lieber als 4 Pin Variante gehabt aber ich denke dass ist schon meckern auf hohem Niveau.Im Endeffekt bin ich Happy den Schritt gemacht zu haben. Selbst nur mit 2 zusätzlich installierten 140er Frontlüftern hab ich schon einen super Airflow und im Basicbetrieb bin ich bei angenehmen 30 Grad. Die LED Leiste leuchtet schön Grell.Bei diesem Case würde ich eher die liegende Htpc Art favorisieren. Obwohl man es auch Hochkant hinstellen kann sieht das irgendwie nicht richtig aus. Aber ansonsten kann ich es voll empfehlen.

En 10 ans d'achat sur Amazon cela doit être ma 2 eme mauvaise évaluation.J'ignore si c'est un produit maladroitement reconditionné ( Achat Neuf ) ou si c'est le constructeur qui a emballé le boitier dans cet état , mais les défauts visuels sont intolérables pour un produit neuf.La visserie de la baie vitrée est sévèrement abimée.La baie vitrée elle-même est rappée sur le bord de la façade avant.Indépendament des défauts , je trouve la qualité des visseries limites.Les lowcost Corsair et Cooler master ont l'air bien plus fiable.Retour obligé.Fort heureusement , le SAV Amazon est lui sans reproche.C'était mon premier et dernier Nanoxia. Vraiment pas convaincu.

Bei diesem Gehäuse handelt es sich um das beste Gehäuse, das ich in meinen IT-Zeiten seit 1992 besitze.Leider ist der Service des Vertreibers "PC-Cooling" das genaue Gegenteil. Wirklich sehr sschade!