VEVOR Router Sled, 60 inches / 152.4cm Width, Slab Guide Jig for Woodworking with Locking Function, Portable and Easy to Adjust, Trimming Planing Machine for Wood Flattening, Home DIY

I had built my own router sled for flattening slabs about a year and half ago. Overall it did the job but I never was thrilled with the sled portion and wanted to upgrade to an aluminum frame with wheels along the side such as this. However the only other version is too expensive for what it was and I was not going to spend time sourcing t track and wheels…brackets etc.Then I kept seeing vevors version and I thought heck for two hundred bucks it saves me time making the sled. I had built a table so I just needed the sled. This worked great.Overall assembly is pretty easy especially if you have worked any sleds before. However you need to make your own router plate. Just order a piece of 3/8” plexi about 10x10 inches and make your own plate. I have a laser so it was easy for me to make the plate to fit my router. Perfect fit. It slides easily through the track and once adjusted the t track no side to side movement.The wheels work as expected….I just made rails from a planed 2x4x8 cut to 2” wide as that gave me the height I needed….I flatten some thick stuff so I need about 4” from bed to bit.So if you just want to save time jimmy rigging the sled this works great. Making the table is easy…you don’t need to overcomplicate it.

The assembly instructions are lacking even for something as simple as this to put together The overall quality is poor. The track does not slide smoothly and continuously gets stuck Affecting its functionality.

Easy to assemble, (if you have the instructions). Does not have mounting plate for your router. That's not necessarily a bad thing, It keeps the cost down. I had one made for $15. I would like to see them offer a plate with dust extraction reasonably priced.

Easy to assemble and works great

Very sturdy. Extremely adjustable. Doesn’t come with a mount for your router, as this would limit you on routers. Used plywood. Very happy with this purchase.And it’s $250 cheaper than the competition.

Had to replace the hardware to make this work. It’s hard to adjust

The media could not be loaded. Go slow take half if you flattening bit and only about 1/6 or less and it works great.

Packing was poorly and there was a utility knife left inside. Did not receive instructions and all parts.