Kingwin SSD SATA to IDE Bridge Board Adapter – Convert Serial ATA Devices to IDE, Supports 2.5” & 3.5” HDD/SSD, Compatible with SATA I/II/III Hard Drives, Easy Plug & Play Installation

Kingwin SSD SATA to IDE Bridge Board Adapter – Convert Serial ATA Devices to IDE, Supports 2.5” & 3.5” HDD/SSD, Compatible with SATA I/II/III Hard Drives, Easy Plug & Play Installation

Q: Does this adapter support the old 40 pin 40 wire cable? Or does it only work with the newer 40 pin 80 wire cables?

It will work with either cable, however your speeds may be limited; the original 40 pin cable was good to 33 MB/s and the 80-pin cable which reduces cross-talk allowed for speeds up to 133 MB/s. Its always better to use the 80 pin cable which reduces cross-talk and improves performance. SATA starts at 150 MB/s and using the 40 pin cable will reduce the transfer speeds a lot

Q: I have an old IDE system with no SATA on the motherboard - I need to replace the hd with a ssd sata drive - can i use this adapter?

I think it should, so long as your sata drive has the right wafer like connections on one side, it should fit, but you might find trouble mounting your hard drive in the normal place, because it fits tight to the drive and keeps the hard drive from sitting right in the tray.

Q: Anyone use this to mod ps2?

The spacing on the connections of the ps2 are a bit different,but if you can connect from ps2 to the bridge it will work. Good luck.

Q: Is it possible to get this into slave mode? The connection on there now that I thought would allow to switch it to slave does something else.

I don't know about configuring the bridge for slave mode, but I would try setting the jumpers on the IDE drive to slave mode and connecting it up.

4.2/5

Produkt-ID: 9177460

Sichere Transaktion

Details

Hardware Interface
IDE
Brand
Kingwin
Color
Not Specified
Hardware Platform
Sata
Material
Aluminum

⚡SATA I/II/III compatibility

💾Supports 2.5” & 3.5” drives

🔄SATA to IDE conversion

Häufig zusammen gekauft

Kingwin SSD SATA to IDE Bridge Board Adapter – Convert SATA Devices to IDE, Supports 2.5” & 3.5” HDD/SSD, Compatible with SATA I/II/III Hard Drives, Easy Plug & Play Installation

24" 40-Pin 80-Wire Ultra ATA 2-Drive Ribbon Cable, Manhattan 332781, Model:, Electronic Store

StarTech.com LP4 to 2X LP4 Power Y Splitter Cable M/F - LP4 Splitter - Molex Y Splitter - Molex Splitter (PYO2L)

Beschreibung

🔧 Upgrade your legacy gear with modern speed—because your past deserves a future!

COMPACT DURABLE - Aluminum build ensures lightweight, reliable performance that fits snugly inside any setup.
LEGACY MEETS MODERN - Seamlessly connect SATA SSDs/HDDs to IDE motherboards—upgrade without replacing your entire system.
PLUG PLAY SIMPLICITY - No drivers, no hassle—just instant compatibility for busy professionals on the go.
UNIVERSAL DRIVE SUPPORT - Works flawlessly with both 2.5” laptops and 3.5” desktop SATA drives for ultimate flexibility.
BOOST YOUR SYSTEMS LIFESPAN - Revive vintage PCs, industrial machines, or gaming rigs with modern storage tech.

The Kingwin SSD SATA to IDE Bridge Board Adapter enables effortless connection of SATA I/II/III 2.5” and 3.5” HDDs or SSDs to IDE motherboards. Featuring plug & play installation and a durable aluminum design, it supports up to 4TB storage and data transfer rates up to 3Gbps, making it the perfect tool to extend the life of older systems without compromising performance.

Spezifikationen

Enclosure Material	Aluminum
Color	Not Specified
Maximum Number of Supported Devices	1
Hardware Platform	Sata
Compatible Devices	Laptop
Hardware Interface	IDE
Hard Disk Form Factor	2.5 Inches
Data Transfer Rate	3 Gigabits Per Second
Memory Storage Capacity	4 TB

Haben Sie eine Frage? Sehen Sie, was andere fragten

Does this adapter support the old 40 pin 40 wire cable? Or does it only work with the newer 40 pin 80 wire cables?

I have an old IDE system with no SATA on the motherboard - I need to replace the hd with a ssd sata drive - can i use this adapter?

Anyone use this to mod ps2?

Is it possible to get this into slave mode? The connection on there now that I thought would allow to switch it to slave does something else.

Häufige Fragen

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Ali H.

Schneller Versand und hervorragende Verpackung. Das Leatherman-Tool fühlt sich sehr wertig und stabil an.

vor 1 Tag

Nadine B.

Ausgezeichnete Kommunikation während des gesamten Bestellvorgangs. Das Produkt ist perfekt.

vor 2 Wochen

Sehen Sie sich alle Überprüfungen von TrustPilot an

Kaufen Sie weltweit ein und sparen Sie mit Desertcart

Preis-Leistungs-Verhältnis

Wettbewerbsfähige Preise für eine große Produktpalette

Kaufen Sie weltweit ein

Wir bedienen Millionen von Käufern in über 100 Ländern

Verbesserter Schutz

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind

Kundensicherung

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind.

Desertcart-App

Shoppen Sie unterwegs, jederzeit und überall.

Fr 23

Zölle & Steuern inkl.

Switzerlandspeichern

Kostenloser Versand

with PRO Membership

Kostenlose Rücksendungen

30 Tagefür PRO-Mitgliedschaftsbenutzer

15 Tageohne Mitgliedschaft

Sichere Transaktion

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Sneha T.

Habe mein Produkt in makellosem Zustand erhalten. Insgesamt toller Service.

vor 1 Monat

Sarah M.

Sehr beeindruckt von der Qualität und der schnellen Lieferung. Werde hier wieder einkaufen.

vor 4 Tagen

Sehen Sie sich alle Überprüfungen von TrustPilot an