SSK M.2 NVME SATA SSD Enclosure Adapter, USB 3.2 Gen 2 (10 Gbps) to NVME PCI-E SATA M-Key/(B+M) Key Solid State Drive External Enclosure Aluminum Support UASP Trim for SSDs 2242/2260/2280

First off, the packaging is top notch. Two cardboard shells offered protection from our gorilla-like USPS employees we all have in our communities. Outer housing isn't some cheap aluminum, it's got some serious thickness (1.2mm / .050") to it. The thickness will undoubtedly help carry heat away from the NVME chips. The housing slides over the NVME and there are no fasteners required to keep it in place, but there are 2 countersunk screws provided if you do choose to use them. Fit and finish are spot on. My previous NVME adapter you had to dismantle with 2 screws and it was a pain. Inside there's a bit of wise mechanics. There's a plastic lever that pushes up on the back of the circuit board that holds the NVME, it pushes upwards so the SSD seats against the housing. Using the included heat tape is a must. The only thing I'd like to see is additional pieces of heat tape. A blue indicator light flashes when there's activity hooked up to your PC.A tiny phillips screwdriver is also supplied. Overall this is a very nice piece of kit. On future versions, I'd like to see a blind screw hole to keep extra screws and brass sockets, as I had to use an unused circuit board hole to keep the unused (extra) screws and brass sockets from getting lost. This is going to go in a mobile kit that's going to see a lot of service calls.

Excellent, compact and easy to use aluminum enclosure with good heat transfer between an m.2 SSD and the case. It also has a nice hefty feel vs plastic although that's purely subjective. Comes with extra mounting hardware for the device and both a Type A to Type C and a Type C to Type C short (about 8"each) cable. A (blue) LED illuminates a good sized chevron that lets you know it's connected and that blinks during data transfer.The case can get hot with larger capacity/higher speed M.2's which means it is transferring heat from the memory device to the outer case where it can dissipate away. Some people will downgrade this as though it's a bad thing, but a hot case just means it's working/doing its job to transfer heat away from your device. The case is lightly textured aluminum, but flat on both sides, so if the surface temperature is too much of an issue, you can figure out how to mount an exterior heat sink with a thermal pad or some thermal paste.I'm just using mine as externally mounted local storage on a NAS for my Roon music server's database, so I'm only housing a 128Gig M.2 that I need to connect via a USB 3.2 and it stays on the high side of warm to the touch. So far every negative review I have read is complaining about either an incorrect assumption of what they received and how it works or a misunderstanding of high capacity and/or high speed solid state storage thermal characteristics.This is an excellent, elegantly designed product that does what it is supposed to and comes complete with necessary hardware including a small screwdriver for the one screw and standoff to mount the memory and if desired, a second screw to lock the case. It's the top seller for a reason, despite not being the lowest cost. Buy it and stop agonizing over the huge number of other products out there.

I use this to house a 2 TB NVME drive that I take to the local library almost every week. I had another brand I used for about a year which began regularly giving me errors when I tried to connect to my desktop. It required me to run a diagnostic and repair the drive every time I disconnected it. Though most of it is backed up, I was getting worried that I could lose the 1 and a half TB of database I have been building. I replaced the housing with this one which seems sturdier and the connectors are more secure. In the months I have been using this one I have not had to run diagnostics or repair the drive even one time.

As someone who has a collection of unused NVMe and SATA SSD modules, this enclosure has proven to be an excellent solution for making the most out of these drives. It allows easy access to multiple SSDs, offering seamless swapping of modules without hassle, making it incredibly convenient for both personal and professional use.Key Features:No External Power Supply Needed: One of the standout features is the fact that the enclosure doesn’t require an external power source. This is a huge plus, as it simplifies setup and reduces clutter. You can simply plug the enclosure into your computer using the provided cables, and it powers the SSDs directly via the USB connection.Compatibility with Both NVMe and SATA SSDs: The enclosure supports both NVMe and SATA drives, providing versatility. This is particularly useful if you have a mix of these drives lying around, as it allows you to use them interchangeably without needing different enclosures for each type.Ease of Use: One of the most appreciated aspects is the ability to easily swap in and out different SSD modules. Whether you're testing drives, upgrading, or transferring data, the ability to quickly switch modules makes this enclosure a very practical tool. The SSDs fit securely, and the swapping process is smooth and tool-free.Cable Options: The product comes with two cables – one USB-C to USB-C and another USB-C to USB 3.1. This ensures compatibility with a wide range of devices, including newer laptops, desktops, and even some tablets or other USB-enabled devices. The inclusion of both cables is thoughtful and ensures flexibility in terms of connectivity.Performance: The copy speeds are impressive, especially when using high-speed NVMe SSDs. Data transfers are fast and consistent, ensuring that the performance of your SSD is not compromised when using the enclosure. Whether you're backing up large files or running software directly off the SSD, this enclosure supports the performance demands quite well.Portability: The enclosure is compact and easy to transport, making it a great option for professionals on the go. Its lightweight design means that it can be slipped into a laptop bag or briefcase without taking up much space.Pros:No external power supply required.Compatible with both NVMe and SATA SSDs.Fast and reliable data transfer speeds.Easy swapping of modules.Includes both USB-C to USB-C and USB-C to USB 3.1 cables for versatility.Portable and compact.Cons:While the speed is great for most tasks, ultra-high-performance users (such as those using top-tier NVMe SSDs for intense workloads) might experience some bottlenecking due to USB interface limitations, but this is typical for most enclosures at this price point.Conclusion:For anyone with extra NVMe or SATA SSDs lying around, this enclosure is a practical and efficient solution. The ability to easily swap modules without external power and with solid performance makes it an excellent choice for both personal and professional use. Whether you're using it for data transfers, backups, or as a portable drive for large files, this enclosure delivers reliable performance and convenience. It’s well-suited for a variety of users, from casual tech enthusiasts to professionals needing quick and easy access to multiple SSDs.