Everest Media SolutionsRJ45 Cat7 & Cat6A Pass Through Connectors - 30 Pcs, 50UM Gold Plated Shielded FTP/STP External Ground for 23 AWG Network Cable

Updated Update: I originally left a fair review but now changed to Excellent! I have looked through 2 new bags and not one of the connectors were bad.These do fit 23 AWG fine despite what one person says. Take a look at the picturesI am using CAT6A STP and have no problems with the wire or the expanded casing fitting in the connector.The quality of the jackets seem very good / no flaking or exposed corners.Great Job.Update: The seller contacted me and asked if I could look at the again (new bag). I will update this review after I do.My experience is no reflections on the ordering or returns process. So far those are great.And the actual product (if all there) is probably very good.However, the quality control is lacking. Half (guess really) of my ends do not have all 8 contacts. I did not figure this out until I wasted about a hour and 4 ends. What I got was 8p7p (Eight Position, Seven Contacts).Too high of price to be throwing a good portion of them away.

I have cat 7 cable and when I connected other rj45 the connection did not work. I changed to this products and it works perfectly at 10Gbps. 100% recommended.

I ordered a set and when received it was obviously previously opened which had me counting them and coming up with 4 missing connectors. Benefit of the doubt I ordered a replacement The second set I ordered the first connector I picked up looked offset. So I took a picture and looked closer and it was missing a tooth giving me 7 of 8 connectors. I started looking at the others and sure enough many were missing missing teeth, when I looked in the bag I found 4 but in total 10+ were missing not to be found. I'm not sure if the original pack had the same issue but I can only imagine. It also turned out the replacement was also missing one of the wire alignment inserts. I wouldn't recommend these to anyone.

These worked great. Specifically with this cable: https://www.amazon.com/dp/B0742RZF6Y/ref=cm_sw_r_cp_apa_i_eE6iFbH3FP1DCWhich is advertised as 23 AWG. The gauge appears to be accurate. In fact it appears to be constructed more like CAT7 cable than the advertised CAT6a.Anyway, these worked well for me with that cable. They probably will work fine for anyone competent who is using them for the advertised purpose with the correct tools and cable of decent quality.Of note is that they do not come with hoods. If you need hoods, buy them separately.

I bought "CAT6" U/FTP 23AWG cable rated for 550 MHz which is actually CAT6A spec. I tried connectors that claimed to work with 23AWG with 1.2mm holes and it absolutely did not work. I searched and I searched and I searched and I always came back to this product. It was the only one that claimed to be able to fit 1.3mm cable but the price kept me away. After searching for over an hour on Amazon, I found no alternative, so I ended up buying this and it turns out it was exactly what I needed.Using a digital caliper, my cable jacket is 7.82mm. The jackets on the conduit wire measure 1.35mm. 1.35mm feels snug in the connector so I wouldn't try to use any larger or it wouldn't slide well. The cable jacket also fits inside of the connector without a fuss.I am 2 for 2 on installing these connectors (1-8 pin + ground tested good). The included holders are very useful at managing this heavy 23AWG cable.Overall, I'm super pleased. I docked it one star simply because of the price but they are gold plated. If this company offered them non-gold plated for a more competitive price, that product would get five stars from me. Even at the high price, I will buy more when these 30 run out simply because I know they will work.

Pretty expensive for the awful quality. I’ve had to throw away almost a dozen because of bad connectors or data not properly passing through the cable. Do not buy these from this company.Edit: Company sent a replacement package at no charge. The replacement package had good connectors. I should reiterate that the seller is good.

REALLY hard to pass the wires. Even with the tool to do it.

I've tried 2 different types of connectors before this one, one wasn't compatible with the ground wire, and the other was physically impossible to get the wires into, despite a full day of trying. I got this adapter in on the very first attempt. Highly recommended. (Use with a pass-through CAT6-capable crimper.)