EVIL ENERGYOil Catch Can, Universal Baffled Catch Can Kit with NBR Fuel Hose, 300ml Aluminum Air Oil Separator Tank for PCV SystemGlobal Recycled StandardGlobal Recycled StandardGlobal Recycled Standard

Great Product. Some sharp edges, but very nice quality. Cut dogleg off supplied aluminum bracket with a hacksaw and bend at a 90 as shown. Mount to frame as shown with Honda bolt, then drill hole in bracket and car frame for second stability sheet metal screw (not supplied) Engine cover still comes off nicely. Engine dipstick and radiator reservoir 100% accessible. Hood prop clears oil can nicely and dip stick is easy to reach as is can bottom to spin off for maintenance. All hoses are relaxed with no pinch points. This method keeps original PCV hose in tact for quick removal in case of warranty work. O rings supplied are a little small, difficult to get over threaded fitting but they work. Be careful not to over tighten fittings or you'll damage the O rings. The coalescing steel wool supplied is plentiful, enough to change out 3 times. Overall a fun install. Highly recommended!

I installed this oil catch can on my vehicle to help reduce oil blow-by and carbon buildup, and it’s already proving to be a great investment. For the price, the quality is surprisingly good — solid aluminum construction, tight fittings, and no cheap plastic parts.Installation was straightforward. It came with all the necessary hoses and clamps, though I did upgrade the hose for a tighter seal (which is pretty common with these kits). Once in place, it fit neatly in the engine bay and hasn’t leaked or loosened after a few weeks of daily driving.After a few hundred miles, I checked the can and it was already collecting a noticeable amount of oil vapor — exactly what it’s supposed to do. This tells me it’s doing its job and keeping that gunk out of my intake system.

The ports for the vapor "in" and "out" seem to be labelled in reverse. the side labelled "in" would be the filtered vapor leading back OUT to the air intake of the engine. Also, zero instructions. I figured out the ball of steel wool provided needs to be cut into a small section and stuffed into the little compartment inside the unit to block junk from going back out to the engine air intake. However, BAD design...that steel wool sheds into metal dust when you cut it. You do NOT want that metal dust to get into your engine. I will cut a little disk of some kind of filter cloth to put into. the little compartment to prevent any metal dust getting out. other than those problems, the product is very good and should work very well.

Great product for the money. Do your homework and read up on other catch can designs and you will find that this catch can rivals the higher priced versions. I had to manipulate the mounting bracket, but that was expected as a one version cannot conform to all installations. Overall, it looks great, works great and I have no negative comments....worth the money for my 2016 GMC Canyon application.

The media could not be loaded. I was able to set this up in our car. It has cut down on the oil burning from the pcv valve. The car no longer smells hot and it was very easy to set up. I added my own mark on the dip stick that comes in the catch can. All in all it comes with everything I needed. I did replace the pcv valve while I was at it. Great product and well made and designed. I obviously put some notes to my self on the canister to keep things strait when I was installing it.

It does the job. The quality is good but definitely time consuming when having to drain out. Installed on my wrx before buying and air oil separator.

Absolutely easy to install. And the hoses are durable. Already filtered out a bunch of junk in 200 miles. My CT is loving it

It works great as a universal kit. I have no issues so far.