Team Associated 1/10 RC10B6.2D 2WD Buggy Team Kit, ASC90024

The B6.2 will be the buggy of choice for high grip-carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor sharp feel and control. Items needed to complete: -1:10 scale electric motor - Electronic speed control - 7.4V, 7.6V LiPo, 6.6V LiFe with "shorty" battery dimensions (Reedy batteries #27335, 27336, 27337, 27338) - Battery charger (#27200) - 2-channel surface transmitter - 2-channel receiver - Steering servo (#27113, 27114) - Lexan-specific spray paint for body - 1:10 scale off-road wheels and tires - Pinion gear - Other helpful items: Silicone shock fluid, Silicone diff fluid, FT body scissors (#1737), FT body reamer (#1499), FT hex/nut driver set (#1519), CA tire adhesive (#1597), Hobby , Needle nose pliers, Wire cutters, Soldering iron, Calipers or a precision rulerFeatures:Symmetric 73mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock ing positionRear hub assembly with modular vertical ball stud camber link and axle height adjustmentBolt-on +1 steering block arms for improved steering responseBody design with lower center of mass / Clear body and wing included67mm CVA s for reduced plunge and minimized friction at drive pin13g aluminum chassis weight included for improved mass balance and easy electronics removal7mm aluminum clamping wheel hexesDifferential height adjustment with 0, 1, 2, and 3mm inserts included7075-T6 aluminum arm s with optimized roll center positions and inserts for tuning anti-squat and toe adjustmentsHeavy-duty V2 routed graphite front shock

• Symmetric 73mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock ing position.
• Rear hub assembly with modular vertical ball stud camber link and axle height adjustment.
• Bolt-on +1 steering block arms for improved steering response.
• Body design with lower center of mass / Clear body and wing included.
• 67mm CVA s for reduced plunge and minimized friction at drive pin.