TORQUE Airbag Air Bag Suspension Kit for 2005-2023 Toyota Tacoma 2WD 4WD and Prerunner 2WD Rear Helper Bag Spring Towing 5000 lbs (Replaces Firestone Ride Rite 2407) (TR2407)

Fantastic quality and even better customer service. The directions are a little confusing but there are youtube videos that explain the installation better. These fit my 1998 Tacoma 3.4L V6 very well and increased payload capacity and ride quality. Great value for the money! I paired these with a Camburg/Bilstein suspension and strut kit, worked like a charm. Be sure to use Teflon tape (provided in install kit) on the brass air fitting on the top of the bag, they will leak otherwise.The upper bracket on the left airbag failed (defect) but the customer service made all the difference.

I got these for my tacoma when hauling a trailer. Take your time and walk through the install several times before you start. Follow the instructions, they are well written with diagrams that are easy to follow. You'll need to simmy and giggle things to get them lined up. Took me about 4 hours. No leaks and they perform great.Works great so far and pressure has kept up with no losses under load.

Install was more difficult than I thought but managed to get everything installed properly, the hose connection was challenging just make sure they’re snug inside the connector, taking the tires off and removing the spare tire and laying on my back was the hardest part

Ordered this rather than the Firestone kit. Was hesitant but figured I’d give them a shot. Kit showed up missing a bracket clamp so was not too confident in my purchase - BUT - I contacted them on a Sunday and late that night they had reached out trying to make it right.They asked for details around the kit, purchase order, and specific part missing and it was on a truck the next day.Once I received the part I completed the install and while I have yet to tow with this yet, I can say it seems to be high quality and solid build. I have a camping trip this September where I will be pulling our 19’ camper with our ‘21 Tacoma TRD Off-road. If there are any downfalls I will update. So far very happy and the kit easily lifts the backend about 3” so I am sure leveling will not be an issue when under load.

Had to tape the rubber stop back on because by the time I took the bags off and got the tires back on. The hardware store was closed. Adding to these air bags. They definitely made my truck drive a lot smoother with all my work equipment in there. But when I finally put an actual load in there (approx. 2800 lbs) the bolt that that screws into the bottom of the bag on the passenger side found its way out and the truck sat down hard and I nearly ran someone off the road. In retrospect! Torque harder than what the specs say and use lock tite.

This fit perfectly in my 18' tacoma sport. I previously swapped the leaf pack with a TRD Pro from my buddy's truck for slightly stiffer springs. I regularly haul firewood with a dual axle trailer and get pretty close to 6,000lbs. Multiple days during the summer months. I was on the fence with ordering a set of Sumo foam blocks. But wasn't in love with the idea of having a permanent stiff ride. I decided to give these a try. First off, they work great. But you will want to follow the instructions and USE LOCKTITE! I went through and did parts inventory to make sure I had all the components before I started to disable my only ride. Follow the installation instructions provided and you'll figure it out pretty easily. The 2 places I used red locktite were for the top locking nut on the airbag, and the bottom bolt for the airbag. I know that locktite on a locking nut is kind of overkill, but I REALLY don't need the bags falling out during a 16 mile trail ride hauling a trailer 2 hours from the nearest town. I also bought a .8 gallon air compressor with tank from a train horn kit. Minus the train horn nonsense for around $80.00. And a air suspension paddle system with gauges and independent levers of each bag. Kind of like what is in an old semi for the seat, but with a gauge. I stuffed that into the right side door in the bed of the truck. Mounted the air compressor underneath on the right side. Above the tail pipe and to the right of the spare tire. Ran a 14 gauge wire in a loom all the way to the battery. Put a 30A in line fuse in it. And threw a 12v flip switch on the other end. Also stuffed in the door in the bed. Now all I have to do is flip a switch, fill the tank and then set my bags to whatever I need them to be. All in it ran me about $400.00. It's not as fancy as some of the bluetooth controlled air ride kits that can run you $5K plus install. But this does what I need it to. And I installed all of it. So if I do have a failure or a leak I know exactly what I'm looking at. Bag kit took about 1.5-2.0 hours. Air setup took an additional 3. Mainly because I an OCD and wanted to have each line it's own color for easy troubleshooting later. And was meticulous about how I ran each hose.If you aren't mechanicly inclined then have an offroad shop, or a custom shop do the install and save yourself some frustration. But if you are on the fence about this kit, I'd buy it. While it doesn't increase towing capacity, it does significantly improve the truck level while fully loaded. And makes it much safer to steer at highway speeds while hauling heavy stuff.

Instructions aren’t very specific, and they leaked after a week of use. Easy to ruin them if you expect them to maintain pressure without checking. As airbags are expected to, they ruin your ride quality. They worked for what I needed them for, but I regret buying them. Poor long term choice.

Stay away if your not willing to cut to fit your brackets, bought these bags for my Tacoma and ran into fitting issues left and right, driver side bottom blade would rub in the gas tank so I had to trim it down right side the same lower main bracket and lower unistrut bracket rubbed on my shocks had to trim them down alas well, upper radius bracket was too big to slide over the top bag bracket had to squeeze it together with a vise also the 4 9/16 bolts that hold it together where a huge pain in the ass to tightened up to lack of to get a wrench in there simple job turned into a 4 hour deal