CLOUDY BAY Ultra Thin LED Recessed Ceiling Light,4 inch 3000K/ 4000K/ 5000K,Dimmable 10W CRI90+,Canless Light with Junction Box,IC Rated, Canless Wafer Downlight,Oil Rubbed Bronze,Damp Rated,6 Pack

Love this lights. Highly recommended. Totally worth it.

These lights are so awesome great value easy to install .they are so easy to set up you can change color in each light or in a group you can turn each light on and off the same way installed them in my hallway and I absolutely live them ..would definitely recommend them !! I have thought of a dozen other places I can use them in my home

After reading a number of reviews, and the description, it wasn’t abundantly clear how these lights are wired. However, after I received them it was pretty straight forward. I would suggest using 12-2 wire if you intend to use the included wire harnesses. I’d suggest wire nuts if you use 14-2 wire because they tend to slip out of the harness easier than the 12-2 wire. Please make sure you have good Wi-Fi wherever you install these lights, because it’s the only way to control the colors and brightness! Last suggestion is to do all your wiring, and install the lights. Remember these lights are daisy chained, so if there’s a wiring issue with light number 3, which would be the third light from the switch or power source, then lights 3-6 will be off. Check your connections at light 3. If it fixes 3-5 then check light 5 until all lights are on. If they start blinking, just turn off the switch, and turn it back on…good luck

So we bought a box from lowes for $40 for one light. These were $10 a light, they are a match for match light but the trimming around the outside.We ordered over 60 lights and only 1 junction box was bad and all the light worked great now after 1 week. The seller was happy to send us another junction box right away. Pretty happy with the outcome. And they are super bright without a dimmer. So I guest you install dimmer switches with these lights

I bought these over identical-looking competing products for 3 main reasons: Available in 6pkwhile many competing products are only 8/12pk (I only needed 3) , the option of 3 colors, and good value in terms of price per unit.Installation in general is pretty easy. Remove the number of punch-outs you need from the control box, install 3/8" NM clamps (not included), run the Romex wire through them, and wire it up using the included wire nuts. Then push the box up into the hole. It does have screw holes for securing it if you want, but most people (myself included) don't bother. Then plug in the light, position the spring clips where they will go into the hole, and pop it in. I replaced a couple flush-mount "boob lights" with these, so there was a bit more work involved in cutting out the original junction boxes, but once the junction boxes were removed (4" round type), I was left with the perfect sized hole for these to pop right into. At least, that was the case with my upstairs hallway. My basement hallway was built by the homeowner, and his junction box hole was a lot more sloppy, so I did have to do a bit of trimming to get the hole right. I didn't have to worry about thickness since mine went into existing junction box holes, but they're very thin. They would definitely clear any joists in 1/2" drywall if you need them to.After installation, they look great! I love the clean, flat look. They were also surprisingly bright. The old "boob lights" had 15W (60W equiv) CFL in them that were supposed to be 800-Lumens. These at 650-Lumens are significantly brighter. It seemed a little too bright at first for a hallway, but I've gotten used to it and it feels just right now. The only minor complaint I have, is between the 2 in the upstairs hallway, both set to 4000K, one is noticeably warmer than the other. However, it's not annoying enough to make me want to go to the trouble to try swapping out the lights and/or control box, especially since wiring the upstairs ones was made a bit difficult since the builder of my house secured all the wiring to the ceiling joists leaving me with very little slack to work with. I didn't ding them a star because I'd say I'm 95% happy with them and very glad I went for these 4" recessed rather than just nicer looking flush mount fixtures.

I purchased these lights to install in my garage. Because these are controllable by an app, I assume they could be hardwired always-on. But, in order to pair them with your app, you need to have them wired to a switch. So, read all the directions before you start pulling wire.After wiring in a switch and toggling three times, they all paired. My WiFi isn’t great, but all six lights paired. Compatibility with google home is a bonus. They are bright and responsive. Perfect for working in the garage.I also liked the push nut connections. I found them secure and tidy.Great product.

These lights look so beautiful, the LED is pure white. I love the feature of the rainbow to put any color. They’re easy to install and so easy to use. They also provided great customer service which were very helpful and attentive. We’ve recommended the lights to our family and friends due to the great experience we had.

Fortunately I had a drop ceiling and ceiling outlet to wire from. Super east to install if you get the quick wiring clips from a hardware store. Set to medium brightness, they’re perfect and work great with dimmer switch. If you have any power dips in your survive, you will notice the light flicker. It’s not the lights, but the service.