SCITOO HVAC Blower Motor with Fan Fit for 2007-13 for Acura MDX / 2009-16 Dodge Ram / 2007-2017 Lincoln MKX / 2007-2017 for Ford Edge / 2011-2013 Wrangler / 2007-2013 Acura MDX TL TSX 25770668/700203

Product worked good

Good

Vehicle installed on: 2011 Ford EdgeOld Heater Blower Motor started making very concerning noises which sounded like a bearing going bad. I then turned to local auto store for replacement part which they valued over $120. I found this item on Amazon and was skeptical about it at first but took a chance. Upon receiving this new Heater Blower Motor w/Fan HVAC Resistors and some YouTube on the installation here are the final results: 1. New Heater Blower Motor w/Fan HVAC Resistors works perfect. 2. Installation was easy with minimal tools required. 3. Would recommend this product from Scitoo Auto any day of the week!

I got this for a fraction (1/5) of the price that the Auto stores was selling it for. And the installation took about an hour, as I was being very careful. It works like a charm, and now I get air throughout the car.This blower motor looks exactly like the one that is in the car, except for the plug on it. It seems very slightly small, it was was really really hard to plug in the mating connector to it. I am very experienced electronics person, I have plugged in countless plugs/sockets of all times, including the Molex ones. With this one, I almost gave up and a final all hell break loose push and scream made the connector to slightly go into the contacts. Then one more final all hell break loose push made the connector go into the socket. There is no way it should be this hard to plug a socket.Other that that one issue, I saved about $250 by going to a repair shop. The repair shop had quoted ~$300.Overall, I am happy with this item, and if wasn't for that connector issue, it would have been perfect.

I put 4 for noise level even though my old one rattled because it does whine a little. Just sounds like a new motor I guess. Mounted right up in 15 minutes on my 2011 ram 2500.

Easy and quick repair. Working perfectly now.

The AC in my jeep wasn't working in the middle of our Caribbean summer so we really needed it replaced. My husband was able to replace it on his own. So that was a plus

This Blower motor is louder than the one I replaced for a bad bearing and it doesn’t move as much air Either

remove 3 Torx T25 screws, unplug the wiring plug. pull old motor. put new motor in. reinstall 3 screws. reconnect wiring harness.easy. any monkey with a screwdriver could do it.People complaining the plug is difficult to re-connect... you must be trying with mittens on. It worked perfecly fine..

Works great I replaced my old one from making a grinding noise from general wear and tear, old was was very dirty and worn down the new one works perfectly!

Far exceeded my expectations

It is noisy don’t recommend