OVERTURE TPU Filament 1.75mm Flexible Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Fit Most FDM Printer (TPU Black)

OVERTURE TPU Filament 1.75mm Flexible Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Fit Most FDM Printer (TPU Black)

Q: Will this work for rubber feet on bottom of toolbox that weighs about 10 lbs ie 3/4" x 1/2" or would it collapse too much?

10 pounds should be no problem, if you print with 100% infill it makes very firm feet that have almost no give at all. If you lower the number of perimeters and infill you can dial in some squishiness.

Q: Can this be painted or stained after printing?

Yes, any TPU material can be painted. I use "Tulip Colorshot Fabric Spray Paint". It adheres to the TPU part well and does not rub off on your hands or clothes. Drys in about an hour or less. I also use a heat gun as well to get it to dry in a few minuets. You can use a blow dryer also. You can select a grey TPU filament as a neutral color, then paint it with the paint above in any variety of colors they provide. That's what I do and it works just fine.

Q: Anyone able to print this on the makerbot replicator 2x? i seem to always get separating layers and starved print spots when i try 230c extr 40c bed.

I don't have a makerbot but in my Artillery Sidewinder X1 I am using 228° extr and 40°C bed, but I modified the extrusion fow to 105% at 0.3mm layer height with very good results. The walls line width 0.4 but 0.3 in the inner and outer walls line width. With 0.2mm layer height or less works very well too.

Q: Will this run ok in place of pla?

Yes but it is flexible and temp setting is little higher than original PLA

4.5/5

Product ID: 370818253

Secure Transaction

Details

Brand
OVERTURE
Material
Polylactic
Colour
1kg Tpu Black
Item Weight
1 Kilograms
Item Diameter
1.75

🌀95A Shore hardness - perfect flex & durability

🔒Clog & bubble-free patented formula

🧩Flawless layer adhesion - seamless prints

Frequently Bought Together

OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (TPU Black)

OVERTURE PETG 3D Printer Filament 1.75mm, Neatly Wound Durable PETG 1kg Spool (2.2lbs), Strong Toughness Filament, Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printers (Black (1-Pack))

OVERTURE PLA Filament 1.75mm PLA 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer (Black 1-Pack)

Description

🖤 Flex your creativity with Overture TPU — where durability meets flawless finesse!

SEAMLESS LAYER BONDING - Experience impeccable layer adhesion that guarantees smooth, professional finishes every time.
UNIVERSAL COMPATIBILITY - Fits most FDM 3D printers, empowering your projects without hardware limits.
CLOG FREE PRINTING ALWAYS - Patented formula ensures bubble-free extrusion and zero clogs for uninterrupted creativity.
LIFETIME SATISFACTION GUARANTEE - Print with confidence backed by Overture’s risk-free, lifetime support and quality assurance.
UNMATCHED FLEXIBILITY STRENGTH - Strikes the perfect balance with 95A Shore hardness for resilient yet soft prints.

OVERTURE TPU Filament 1.75mm is a premium flexible 3D printing material with a Shore hardness of 95A, delivering exceptional softness and durability. Designed for superior layer adhesion and a clog-free printing experience, this 1kg spool fits most FDM printers and comes vacuum-sealed for optimal freshness. Backed by a lifetime satisfaction guarantee, it’s the go-to filament for professionals seeking reliable, high-quality flexible prints.

Specifications

Manufacturer	OVERTURE
Brand	OVERTURE
Model Number	OVTPU175
Colour	1kg Tpu Black
Material	Polylactic Acid
Number of Items	1
Size	1.75 mm Diameter, 2.2 lbs/ Spool
Manufacturer Part Number	OVTPU175
Manufacturer	OVERTURE

Have a Question? See What Others Asked

Will this work for rubber feet on bottom of toolbox that weighs about 10 lbs ie 3/4" x 1/2" or would it collapse too much?

Can this be painted or stained after printing?

Anyone able to print this on the makerbot replicator 2x? i seem to always get separating layers and starved print spots when i try 230c extr 40c bed.

Will this run ok in place of pla?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Fr 179

Duties & taxes incl.

Switzerlandstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews