Hosyond 3.5 inch 480X320 TFT Touch Screen Module LCD Display Shield with SD Card Socket Compatible with Arduino R3 Mega2560

Hosyond 3.5 inch 480X320 TFT Touch Screen Module LCD Display Shield with SD Card Socket Compatible with Arduino R3 Mega2560

Q: What is the pin connection description for this module?? ex., is the led pin a backlight and what voltage?

Number Pin Label Description 1 VCC 5V/3.3V power input 2 GND Ground 3 CS LCD chip select signal, low level enable 4 RESET LCD reset signal, low level reset 5 DC/RS LCD register / data selection signal, high level: register, low level: data 6 SDI(MOSI) SPI bus write data signal 7 SCK SPI bus clock signal 8 LED Backlight control, high level lighting, if not controlled, connect 3.3V always bright 9 SDO(MISO) SPI bus read data signal, if you do not need to the read function, you can not connect it (The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them) 10 T_CLK Touch SPI bus clock signal 11 T_CS Touch screen chip select signal, low level enable 12 T_DIN Touch SPI bus input 13 T_DO Touch SPI bus output 14 T_IRQ Touch screen interrupt signal, low level when touch is detected

Q: Does anyone have an arduino example code running with this 3.2" spi display ? - i tried adafruit, ucglib, tft_espi in two displays and none worked.

It works fine for me with an ESP8266 or ESP32. I couldn't get touch to work on the ESP8266 because of lack of output pins. I used TFT_eSPI for the picture and touch. Use Bodners examples.

Q: There is conflicting information in the description. 3.5 in with 480x320 is not a 9341. What is this display's proper description??

I'm not an authority here, but I think that you are correct about the conflict.... ILI9341 is 320x240, and ILI9488 is 480x320. While the main description says ILI9341, one of the pics for this model does identify it as IC Driver ILI9488. perhaps the seller will update the incorrect information. FWIW, good price for this display, and includes touch ..

Q: Is there any way to control brightness of the backlight?

You can drive the 'LED' pin with a PWM signal from a GPIO. The duty cycle of the PWM signal will be proportional to the brightness, just like controlling the brightness of an LED (there are a number of Raspberry Pi and Arduino examples of doing that).

4.3/5

Product ID: 456766727

Secure Transaction

Details

Brand
Hosyond
Model name
3.5 inch TFT
Connectivity technology
USB
Included components
NO
Operating system
Linux

⚡8-bit parallel bus

🎨16-bit RGB 65K colors

📏480x320 resolution

Frequently Bought Together

Hosyond 3.5 inch 480X320 TFT Touch Screen Module LCD Display Shield with SD Card Socket Compatible with Arduino R3 Mega2560

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

Description

🚀 Elevate Your Projects with Touchscreen Brilliance!

TOUCH AND GO - Interactive resistive touch screen for intuitive control and experimentation.
VIBRANT VISUALS - Experience stunning clarity with a 480x320 resolution and 65K color display.
RAPID REFRESH RATES - Enjoy faster performance with an 8-bit parallel bus, outpacing traditional serial SPI.
SEAMLESS COMPATIBILITY - Easily integrates with Arduino R3 and Mega2560 for hassle-free plug-and-play.
VERSATILE POWER OPTIONS - On-board level shifting IC supports both 5V and 3.3V operating voltages.

The Hosyond 3.5 inch TFT Touch Screen Module is a high-resolution LCD display shield designed for seamless integration with Arduino R3 and Mega2560 boards. It features a vibrant 480x320 resolution, supports 16-bit RGB color, and includes an SD card socket for expanded functionality. The resistive touch screen allows for interactive applications, while the on-board level shifting IC ensures compatibility with both 5V and 3.3V systems.

Specifications

RAM	DDR2
Brand	Hosyond
Series	3.5 inch TFT Touch Screen Module
Operating System	Linux
Item Weight	2 ounces
Package Dimensions	5.24 x 3.19 x 1.06 inches
Processor Brand	Atmel
Number of Processors	1
Manufacturer	Hosyond
ASIN	B0B5ML6R5L
Date First Available	July 2, 2022

Have a Question? See What Others Asked

What is the pin connection description for this module?? ex., is the led pin a backlight and what voltage?

Does anyone have an arduino example code running with this 3.2" spi display ? - i tried adafruit, ucglib, tft_espi in two displays and none worked.

There is conflicting information in the description. 3.5 in with 480x320 is not a 9341. What is this display's proper description??

Is there any way to control brightness of the backlight?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Fr 41

Duties & taxes incl.

Switzerlandstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

View all Trustpilot reviews