VideoSecu Pole Mounting Bracket for Security Camera Housings CCTV Security Cameras Wall Mount Bracket, TV Monitor or DVD, Compatible with TV Mount or DVD Mount A3H

I use this to attach an outdoor tv antenna to a plumbing vent pipe. I attach it to the vent pipe, then screw clamps into it used to hold electrical conduit, I put a 1 inch by 8 foot antenna mast up, tighten it down with the clamps, and I have very simply erected tv antenna. If you thought that putting up a tv antenna was going to be too difficult, this product will make it easy.

used this to mount an antenna mast on the side of my camper. Worked very well for what I needed.

Used this to mount the latest gen Ring Stick-up camera in a tree. Slid a small piece of wood behind the bracket in order to use the mounting ring included with the camera. Had to cut the screws about 1/4”. Also installed a camo skin to hide it. a could probably paint the clamps, but it’s hidden pretty well, as you can see in the pic. Can’t beat it for the price!

The description should state that it will NOT work as well on poles LESS than 1.25 inch (30mm) in diameter. That is because the vertical edges of the curved black part (the plate) are meant to press on the pole to keep it stable, but they can't do that if the pole diameter is too small. (Buying smaller hose clamps will not help that.)The hose clamps are Stainless Steel but the black part is regular steel with a good coat of black (powder?) paint. However, the screw holes have no paint so I expect them to rust over time. (That might not be a problem for people who don't expect to ever change what is mounted to it though.)The black part is thick and strong.

I used this to mount a smaller rear surround speaker to a post in my basement. The pre-drilled holes matched perfectly to a speaker mount's and the included fasteners worked for the application. All I needed to do was pickup some larger clamps. So far, so good.

I used mine to mount outdoor speakers on a pole. Work very well for that.

Solid plate, hose clamps can be added for larger diameters. I used a tin snip to cut them for my smaller diameter tripod leg to avoid snagging cables on the clamp. Attached velcro to the plate and NUC and I have a solid but removable mount for a lightweight NUC PC.

right size for pole mounting IP cameras like NEST or ARLO, BUT screw threading is so bad that I needed to re-TAP every screw hole with 1/4" - 20 tapping tool. knock off 2 stars for that inconvenience.