Full description not available
J**.
Seems like it’s a good switch
Didn’t worked for my use but it looks like a good switch so I’ll find a use for it.
C**S
Works as advertised
Great little switch, works just fine. I wish the color of the wire leads weren't so weird, but that's ok :)
J**.
perfect fit
works perfect..
D**E
Worked ok at first
Installed and wired to a relay to drive aux lighting on my '09 Triumph Bonneville.Worked well at first but just a couple of nights ago it failed. LED in the switch still lights up but the output from the switch is not reliable.I've checked all the wiring and verified that the issue is in the switch itself. *Sometimes* if I wiggle the switch itself it will turn on the lights but then they shut off again. Assuming the connection in the switch itself is dirty or poor quality.
W**G
Only 4 stars because a screw was missing.
The switch arrived a day late and then when I went to install it I discovered that a screw was missing for the clamp. Nothing in the plastic bag or the shipping envelope. It took me forever to find a screw with the proper thread pitch, cut it down to the correct length, and grind the head to the diameter that would fit in the clamp. A major annoyance. But I did not have time to send it back and wait for another one to be shipped, I need this switch to get my lights working again.Now the switch is nice, and it illuminates good as well, not to bright. I would have gave this 5 stars if it wasn't missing parts.
E**0
Nice switch
Working as expected. I installed it to turn on and off the GPS charger in my motorcycle. Nice switch.
B**R
Good handlebar switch
It’s a good handle bar switch for a atv The only issue I had they used a black wire for hot on a 12v system which could lead to people installing wrong and burning out the switch
O**N
Power Switch for Can-Am Ryker Rally 22 - M4 x 16 mm/ 0.7 screws
Use this switch for my Can-Am Ryker Rally 2022. Mounted to handle bars 7/8. I lost screws by dropping them. Had to get replacement screws from ACE Hardware. Purchased M4 x 16mm/0.7 screws and they worked perfect.I use this switch and a kill switch to keep my under-glow LED lights from draining the battery. Helps prevent parasitic draw. Looks like it is OEM and cosmetically beautiful on my Ryker. Can be used for other purposes as well.
Trustpilot
2 weeks ago
1 week ago