Magnetic Wireless Charger Car Mount, CD Slot Phone Holder, QC3.0 Fast Charging. Fits iPhone 11/ Pro/Max, Iphone10/XS Max/XS/XR/X/8 Plus/8, Samsung Galaxy S9/8/7/Note 8

The BEST car holder I've ever had! If you're phone has wireless charging capabilites this magnetic option is the best solution I've found if you don't use your CD player much.I've tried other other products that charge and hold my phones over the last few years and this product is the best I've found! I've had wireless charge phones (all LG) for many years. Now I'll tell you my Pros and Cons of the ones I've tried. All my prior holders were non-magnetic so they relied on the side tabs you had to use two hands to open apart and then squeeze to hold your phone in place. And you had to connect your USB cable each time. So time-consuming and sometimes frustrating and awkward fighting those two things!Car vent holders: I didn't like that it got hot over the winter when the heater was on and it covered the much needed cool air flow during the summer. And if use your GPS quite a bit you are very limited in the adjusting the viewing angles. My car vents are great for air but the angles and location of the vents weren't good for viewing my phone at all. My phone would sit at odd angles to hard see clearly.Car cup mount: the one's that sit in the cup holders were too low are when using GPS and they take up a cop holder which I use a lot of.Sticky dashboards or suction cup: eventually fall off. And the glass suction ones blocked my views and and eventually fall off during the winter when the suction fails or falls off because of condensation.The CD slot option for me is the best solution. I listen to a lot of music but my car reads the 32GB memory stick via its USB port. My music files are MP3 so can easily have 500 songs on my memory stick. And I have 4 sticks I swap. If I want to listen to a CD it's not hard at all to remove this device from the port. But 98% of the time I listen via the USB stick or via Bluetooth.About the actual device. The build quality is excellent. It's well-designed in that's it clean looking, not that many parts and the parts are all intuitive. The parts are easy to understand and use. The parts are solid and not flimsy. The design is not honkingly huge which I like. I don't want a monstrous gadget taking up space like other holders I've had in the part.The charging portion is excellent! It seems to charge as fast as a direct USB cable. The instructions are easy to follow and the magnetic alignment works perfectly. Once the phone is magnetic mated, it starts to charge immediately. A godsend - it all happens in half a second.On my car the location of my stereo/CD slot is near the top of the dashboard height so it's at a perfect height for me. Great for GPS. It does not black my windshield view. And I LOVE LOVE LOVE the magnetic feature because it's easy to pop off and on with one hand. And my phone always starts charging immediately when mated magnetically. No more squeezing or adjusting side tabs or grips to attach and remove your phone, connect the USB cable to phone, like in the past holders I've had. All of which required two hands. It might sound like a minor inconvenience but in day to day use its so much less of a headache by just grabbing your phone or popping it back on the magnetic plate than squeezing those damn side tabs with two hands and connecting the charging cable. Even if your phone is not wireless charging enabled, get a magnetic mount - it is a huge game changer! It's so much easier to deal with. It's actually more of a pleasure feeling that magnetic 'click'. Those two-handed other methods are so good to say goodbye to!Also because it mounts solidly to the holder I can actually easily tap on the phone to call or press phone menus. I use to have one of those holders that were were on the long bendable gooseneck tubes but during driving the phone bounced around too much, making it sometimes hard to see. Also the gooseneck tubes would bend when I'd connect or remove the phones and I'd have to readjust it. A pain!CONS: The magnetic plate is too big in my opinion. I had to find a new case that was fully flat on the back so the magnetic plate had a good unimpeded surface to attach too. And the magnetic piece is ugly but I knew that would be a given. I know XVIDA sells cases with the magnets integrated in the shell but does make any versions for the LG brand. And the ones they do make are black. They should make brighter colors which I prefer because I'm constantly misplacing my phone and it's so much easier to see and find a bright colored case.Also I personally don't like the huge light-up X that lighted up the base of the charger. It's just too big and glaringly bright at night when I don't need the holder or hold my phone or to charge my phone when it's in my pocket. . A much smaller X or a discreet light up dot would suffice. I personally would just remove the light up option altogether. The magnetics on the plate on your phone easily clicks and aligns your phone to the mount each time anyway.Also I wish they sold extra magnetic plates in case I want to change my case. Where can I buy those?

Doesn’t charge phone. Randomly charges for a few seconds, then nothing. They want you to buy their case, which is bulky and not attractive. Says it works with 11pro as long as your case is thin. My case is as thin as they make for an 11pro, but this charger wont charge it. Also magnet barely holds it on the charger. Nowhere near as strong of a magnet as my Nite-Ize magnet phone holder.

This mount works great, not sure what the other complaints are about. It comes with a magnetic card which you place between your phone case and your phone, and that allows any case to be used and magnetically mount to the pad. My phone case is actually already magnetic, it's a wallet case with a magnetic flap, and I don't even need the card that comes with the mount since the magnets in the mount are so strong already.With that said, you'll need to use the card with nonmagnetic cases, which is pretty obvious. It works great, no bumps have dislodged my phone yet. The mount holds to the windshield in an F-150 well, it only comes off if you pull on the mount arm with a decent amount of force.The wireless charging works but only if your case supports it. My wallet case is too thick and does not support wireless charging, so I have another case that's thinner and I can confirm the wireless charging does work fine. The area where wireless charging occurs isn't huge, sometimes you have to move the phone around on it just a bit before it is charging steadily.Overall this the only mount which is sleek looking and charges wirelessly, so that's a win. One drawback is the "X" light on the mount stays lit up green at all times, which isn't annoying while driving since your phone will be on the mount. However, after parking your car, other people will be able to see this mount inside your car due to the light. That may be something to consider if you live in a crime prone area.

This is not the "lowest bidder" approach. BUT it works exactly the way it is described. Maybe better. We have three, one in each car and I'm using a suction cup one in my office. Just works so well and so easy. We both are using relatively light weight cases with the Xvida magnet inside. As described works great. Phones don't fall off in the floor of the car and they are always charging. Great hands free visibility. Can you tell I love them. As I heard someone say a long time ago, "long after price is forgotten, quality endures"

I used this product daily and have been thoroughly happy with this product up until a month ago. The magnetism and charging work great and my phone stays connected to the charger without ever falling off. It has always been a bit wobbly while driving which seems to be because the piece that is supposed to put pressure on the rubber, to keep a strong suction to the window, doesn’t actually collapse all the way to the rubber to put significant pressure against the window. It’s practically just staying connect to the window due to the stickyness of the rubber. This wasn't a big issue until about a month ago when the suction completely failed and will no longer stay mounted for more than an hour to the windshield. I’ve tried cleaning it with water and nothing allows it to stay suctioned. Without it staying suctioned to the windshield it’s completely unusable. I would consider this a 5-star product, but with the suction mounting issues, I can’t give it more than 2-stars, which I’m only giving because the charging and magnetism work well.*Also of note, the fan built into the charger makes a high pitched squealing noise during the winter whenever temperatures were be 40 F.