Locking Pliers with Unique Non-Slip/gripping Screw Removal Jaws for The Easy Extraction of Damaged/Stuck Screws, Black/Green. Neji-Saurus mole Grip Pliers by ENGINEER (Small)

Engineer is Japanese brand whose tools are of very high quality and designed for the professional user; a small number of specialist and semi-specialised items were purchased since the first introduction some years ago. Unlike other Oriental-made brands, the grade of steel used is high and very suitable for the task. Lesser Oriental brands use a cruder and softer steel that usually includes aluminium and other metals derived from vehicle scrap.This "ENGINEER pz-64 Locking Pliers, Black/Green" is not just another locking pliers but has its own unique features, firstly in the jaws that include vertical grooves to lock onto a screw head, nut, bolt etc should it have been previously damaged in some way and not removable by other means. It is then capable of removing it cleanly and easily. There are also the usual horizontal grooves, too, for every other situation. The tool is quite short, only 14 cm (approx 5.5 inches), and ideal for smaller tasks and use in tight spaces.Engineer have also modified the design from the usual. Not only have soft-grip handles been added but its overall design locks very differently to other 'Mole' wrenches; when most have a separate locking and release bar built into the section without the adjuster screw, this design needs only to have its handles prised gently apart. Otherwise, functionality is identical.Quality comes at a price and Engineer-brand tools are more expensive than other high-end equivalents. Compared with the bargain brands that may not survive the first half-dozen tasks facing them (many of those previously purchased failed after just one or two), these are most likely to survive a working lifetime.

Good quality item as you would expect with Japanese made tools. Works great for extracting screws, but if you plan on buying these to replace regular vise grips, you cant. It shows that the max it can take is 20mm pipe, it's not close to that. I'd say the max would be 10mm ish, tried 20 and it's impossible to close them no matter the setting it's on. Tried a 15mm bolt hex head and it couldn't do it. Tried 10mm round steel and it was able to clamp that,but I think these are mainly made as screw extractors. For screw extractor pliers they're 10/10.

I needed a new pair of mole grips, did a search and spotted these, I did read they are small but the job I needed them for was small anyway. Just arrived and they are even smaller than I thought they would be, I would go as far as saying they are like micro size in comparison to the old full size set Ihave, however, they are well made, have a great gripping strength and as another reviewer mentioned would be ideal in a restricted space like under the sink etc, I might still buy a new full size version eventually for bigger jobs.I have added a photo next to a BIC pen for scaleI have not had a pair of mole grips that don't have the release lever (the auto does) but I see comments about the other versions mentioning that, the grip is so strong I am surprised this has been omitted as it takes quite a bit of force to separate them.I also have a cheaper set of medium size mole grips (an impulse buy from Tesco I think) and they are not of good quality, the teeth and grip handle don't align and they feel as if they will fall apart when put under any strain, so are just about useless for any serious job, the point is, if you are going to buy a set of mole grips pay that bit extra for a more professional set, it will be worth it as they are a very versatile tool and if looked after will last a lifetime.

A small specialist mole grips. Made for getting difficult "rounded" screws and bolts out. The advantage of this style of tool is you can grip the head of a screw and just turn it until it comes out, with no having to adjust the position of pliers on every turn. I find this feature very easy to use myself, with my bad wrist joints.Not for using on the larger types of bolts etc. but a very handy tool to have for smaller stuff like you find on motorcycle engines etc., which usually have very soft screws on them.I highly recommend this tool for "mashed" screws.

I had some very rusty screws on my down pipes I needed to remove for painting. The front of the house, I tried everything to remove them. Eventually I snapped the brackets and banged the screws into the wall. When it came to the back of the house, I thought I would try this pliers. I had all the down pipe brackets off in 10 minutes. All the rusty screws removed. I can honestly say. These work. My partner didn’t think they would because they didn’t look any different to the tonnes of other pliers we have. Well worth having in your toolbox

I did buy & try the Locking Pliers with Unique Non-Slip/gripping Screw Removal Jaws for The Easy Extraction, after I used for a few days, I very impressed by it's quality, at which point I got my son a Locking Pliers, so he has his own & not use my Locking Pliers. Once set the Auto tension works very well on different size screws.

The grip itself is really good, the engineered tip works so well and will latch onto the tip of a needle, if required. Removed loads of chewed screws with ease using these, they've never failed. Also used them as a mole grip and, again, they bite very well and the metal holds up.My issue is the rubber handles didn't take long to start coming off, and once they do that's them.. they just come off at every use and you're as well chucking them! My tools were stolen recently and I'm torn over whether to buy another set of these. I'd give these 5 stars all day long if it wasn't for the rubber handles coming off..

I tried a few other ways of getting the stripped screw out and couldn't do it. This worked in a minute with no drilling and no clean up required. I can't believe I'd never heard of these before!