Worx Pegasus 2-in-1 Folding Work Table & Sawhorse, Easy Setup Portable Workbench, 31" W x 25" D x 32" H Lightweight Worktable with Heavy-Duty Load Capacity, WX051 - Includes 2 Clamps & 4 Clamp Dogs

This is a great design for a collapsible work table. Folded up, it fits in a closet (see photo). It's easy to open and close (though you have to be careful not to pinch your fingers when you close it). Opened, it provides a fairly large, stable work surface with some clever features. The best features are the two bar clamps that slide into tracks in the table top and the bench dogs that fit into holes in the top. The clamps are light duty and they can't put as much pressure on as a Bessey, Rockler or similar bar clamp, but they hold parts in place well enough to allow assembly with screws or glue. It weighs about 30 pounds, so it's light enough to carry around a home or yard.

Has some heft to it. It is a very nice work platform. The clamps and clamp guides are a really good feature. The folding top has a very decent sized work surface. Clamps are stowed with it making it easy to keep track of and to access clamps when you need them.Can be linked with another one to make a larger work surface.Good product for a handyman, pro or completing that to do list where you need a portable table, clamping surface and work surface or travel to a site and work.Can easily grab and go in a truck, van or even a trunk. Gonna be tighter in a trunk. Still doable.Assembly is easy. It is already assembled. Just familiarize yourself with pinch points, where the table lowering levers are at.Easy to clean with a shop vac or shop towels.Value: Considering today's prices for saw horses and lumber or plywood to make sure top, getting clamps etc and having to use 2 saw horses is stabilizing them and that frustration It is worth the price paid.

My husband really likes this work table. He’s a Milwaukee only kind of guy but we couldn’t get a stand for his saw on island so I got this for him. He was not happy to go off brand but needed a table. After checking it out and using it for a bit he actually enjoyed the convenience. It’s great quality, sturdy, easy to fold and such a good price. Highly recommend!

This is exactly what I needed! I just received the Pegausus work table, and I'm very impresses by the quality, design, and functionality. This is going to prove to be money well spent.I really like the ease of use. The table sets up in literally seconds. Likewise for folding it back down. And, once folded down, the table is reasonably light, and easy to move around. The included clamps are decent...probably not the highest quality clamps available, but I'm certain they'll do the job just fine.

UPDATE (03/31/2023): Having owned and used this folding work table for approximately one year, I can report that I am still Impressed with the table itself (still 4 stars). However, I'm disappointed with the bar clamps (2.5 stars) because they don't have a lot of clamping force. They hold things, just not real securely. I would not recommend relying on the bar clamps if you had to secure material very tightly.ORIGINAL REVIEW: I suspect that, like many people, my choice of a portable/folding work table came down to the Worx Pegasus and the Keter folding work table. I spent hours researching folding work table options, reading reviews and watching YouTube videos about the various options. Ultimately, I narrowed my choices to the Worx Pegasus and the Keter folding work table. I ordered both with the intention of keeping the one I liked most and returning the other (fortunately, Amazon offered free returns for the Worx Pegasus and I could purchase and return the Keter table at a local Northern Tool store). The Keter folding work table I ordered was the model with extendable legs and maximum load capacity of 750 lbs. Keter also makes a model with non-extendable legs (fixed height of 29.75 inches), which has a maximum load capacity of 1,000 lbs. Except for the legs, the two models of the Keter table are otherwise identical.Even though the Worx Pegasus was more expensive than the Keter folding work table, I chose the Pegasus for the following reasons:1. The design of the Pegasus is simpler and more elegant. Set up of the Pegasus is a breeze and literally takes just a few seconds. Spread the sawhorse legs, lift the "wings" of the table until they click and lock in place and you're done. Setting up the Keter folding work table is a multi-step process. After dropping the legs and lower shelf of the Keter folding work table from their collapsed position, three different table top supports need to be locked into place.2. The table top of the Pegasus is larger (775 square inches) than the table top of the Keter folding work table (728.6 square inches). In addition, the Pegasus table top has embossed rulers and recessed storage trays for fasteners, drill bits, etc. on both "wings" of the table. The Keter folding work table top has no rulers or storage trays.3. The Work Pegasus feels more solid/stable to me. Once the "wings" of the Pegasus were raised and locked in place, the table top was very sturdy when I pushed down on it. And it didn't wobble when I tried to shake it. The Keter folding work table also felt very sturdy when I pushed down on the table top, but it wobbled noticeably when I put my hands on the table top and shook it. I suspect the Keter folding work table with the non-extendable legs might not wobble as much as the model with the extendable legs, but I suspect it would still wobble more than the Pegasus simply due to the design of the Keter table and legs. Although the Keter folding work tables have much higher load capacities, the 300 lb load capacity of the Pegasus is more than adequate for my needs. I doubt I'd ever put anything weighing more than 100 lbs on a folding work table. For what it's worth, there is a YouTube video of a guy who stacked 600 lbs of steel weights on a Work Pegasus (300 lbs on each side).4. The overall look and feel of the Worx Pegasus gives the impression of higher quality. In my opinion, the fit and finish of the Pegasus is superior to the Keter folding work table.5. The bar clamps that come with the Worx Pegasus are longer (18 inches vs. 12 inches) and appear to be better quality (larger overall and "beefier" material) than the Keter bar clamps. The Pegasus bar clamps can also be inserted on both sides of the table and extend almost the entire width of the table. The Keter bar clamps can only be inserted on one side of the table and extend only 60% of the width of the table. Storage of the Pegasus bar clamps on the sides of the table is also easier. Both Pegasus bar clamps can be grabbed and stowed away quickly from either side of the table. The Keter bar clamps are stored in cutouts on the lower shelf and must be returned to their fully closed position to fit in the cutouts. The Keter bar clamps cannot be retrieved or stowed away from one side of the table.It should be noted that only Worx-brand bar clamps will work in the T- rails on the Pegasus. Non-Worx bar clamps do not have the parts required to keep the distant end of the bar clamp in the T-rail track or secure the "trigger" end of the bar clamp to the table. Non-Worx bar clamps could presumably be used in a vertical orientation with the Pegasus work table, but, in my opinion, the egg crate plastic construction of the Pegasus table top is not designed for using clamps in a vertical orientation. In order to use clamps in a vertical orientation, one would have to place a flat piece of wood or other material on the underside of the table top.It does not appear that extra or replacement Worx-brand bar clamps can be purchased separately from Amazon or other retailers. Unlike the Worx clamp dogs, the Worx bar clamps are not advertised for sale at the Worx website or available for purchase on Amazon. Perhaps additional Worx bar clamps can be purchased directly from Worx by contacting its customer service department.6. The T-rails for the bar clamps on the Worx Pegasus are made of fairly thick aluminum and each T-rail is securely screwed into the grooves on the table top. The T-rails for the bar clamps on the Keter folding work table are plastic and appear to be press fitted or slid into grooves in the table top.7. The Worx Pegasus includes four clamp dogs that allow you to clamp material at various places on the table . They can also be used to clamp round and oddly shaped items. Additional clamp dogs for the Pegasus can be purchased separately. With the Keter table, material can only be clamped to one side (unless, perhaps, the clamp is oriented vertically). The Keter folding work table does not include any clamp dogs and there are no holes for clamp dogs on the Keter table.8. The working height of the Pegasus is fixed at 32 inches, which is an acceptable height for me (I'm just over 6 ft. tall). The starting height of the Keter folding work table is 29.75 inches, which, for me, is too low. That's why I ordered the Keter table with extendable legs. The legs of the Keter table extend an additional 4 inches, in 2-inch increments, from 29.75 inches to 31.75 inches to 33.75 inches, but the legs are a pain to extend. Each leg has to be extended individually and must be returned to its shortest length before collapsing the table. The Pegasus is at an acceptable height without my having to do anything further when setting it up or folding it up. The maximum height of the Keter table -- 33.75 inches -- is a nice working height, especially for taller people, but the Keter table feels increasingly wobbly as you raise the height. If I had kept the Keter table, I probably would have used it at the middle height of 31.75 inches most of the time, which would have necessitated extending all four legs each time I set it up and returning them to their shortest length each time I folded it up.9. The Pegasus comes with a three year warranty (six years if registered at the Worx website). The Keter table comes with only a one year warranty.10. Although the weight of the two tables is similar (approximately 30 lbs), the Keter folding work table feels heavier when you carry it because it doesn't seem as compact as the Worx Pegasus when folded. The carry handle on the Keter table is a nice feature, but after the Keter table is folded flat its legs tend to flop out as it is being carried. The Pegasus doesn't have a handle, but I found I can carry it easily under one arm. Shorter people (or people with shorter arms) may find it more difficult to carry the Pegasus under one arm.TIP: The Worx Pegasus stores and can be carried more easily if you stretch a bungee cord around it after folding it. A 36- or 48-inch flat bungee cord fits nicely in the T-rails on each of the "wings" of the folded Pegasus table and holds the "wings" securely in the folded position when it is being stored or carried. See attached photos.One criticism I have of the Worx Pegasus table is the lower shelf seems flimsy. Worx claims the lower shelf can hold up to 20 lbs, but I would be hesitant to put that much weight on it. In contrast, the lower shelf of the Keter folding table looked like it would hold much heavier items. However, because of the design of the table top supports on the Keter table, items stored on the lower shelf can only be reached from one side of the table.

The Worx Pegasus is a solid, portable work table that also converts into a sawhorse. It’s lightweight and folds up easily, making it great for small workshops or job sites. The table surface is stable for most DIY tasks, and the included clamps work well for holding materials in place.

I absolutely love this table. Light weight, easy to setup and take down, a must for any project. And it can be attached to a second table for larger projects. Well built and easy to clean.

Do I like mine?Yes, enough to buy TWO more. My set of three will soon have a 4th. This is extremely versitile.I keep finding more uses for it.