ESUPPORTCar 2" 52mm Digital Water Temp Gauge Blue LED Fahrenheit F

Been out in the weather for years and still works great

The media could not be loaded. Our original temp guage did not work. We drive on the beach alot. We were worried about overheating. So we got this good looking, easy to read temperature guage. Easy to install. Follow the directions. You will need to lengthen the wires. It connects to 'keyed power' and the temp sender on the engine. Locate this before you order. you might need a new sender if the old one doesn't work. We got the guage holder separately, from Amazon also, as well as a new sender. Covered all the bases.Follow up note: After installation we found the faulty wire to the OEM guage. Once repaired, the old guage in the IP worked fine. So we don't need this great looking guage. Let me know if you want it , cheap.

Complete junk. The coolant sensor is very cheaply made. Never worked from the moment it was installed. Don't waste your money. The oil pressure gauge never worked either. Stays on 150. The volt gauge works bit it's a few volts off. Not reliable at all. Spend the extra for a good reliable set of gauges. I bought the ProSport EVO series and the are dead on the money. Amazon has turned into the US version of Temu just overpriced. It's hard to find good quality products from Amazon anymore.

Nice. Good part

I ordered an oil pressure gauge, oil temp gauge, and water temp gauge. Install was great, you shouldn't have any issues if you know what you're doing. The gauge faces are easy to read during the day, and the warning lights are really useful on the track. The only complaint is they don't have an ability to dim and are slightly too bright at night. They seem accurate, and at least for water temp, it matches the readings of my secondary sensor. For the price, these honestly can't be beaten. The only issue I had, and the reason I rated them 4 stars is that the oil pressure sensor has failed after two weeks. On cold start, it reads 150psi for about a minute and then goes back to normal. I was able to process a replacement through amazon to fix this issue, but who knows how long these will last. These are great tools, and actually helped me solve several overheating issues before they became major problems. I'd recommend these to anyone who needs gauges but has a budget in mind. They are at least 80% as good for way less than half the price.

I installed this in my John Deere 6x4 Gator to keep an eye on the engine temperature. The vehicle does have an idiot light that came on a few times but I wanted to know what the temperature actually is since the radiator fan does not run constantly.This was an easy install. I purchased an Universal Radiator Hose Sensor Gauge Adapter (28mm) to spice into the radiator hose coming out of the engine an inserted the sensor into the adapter. I cut a 2" hole in the plastic dashboard to mount the gauge.The minimum reading on the gauge is 104F when cold. But as soon as the engine warms up the thermostat opens, the gauge responds immediately.

The guage is great... the oil sending unit is hugeIf you have a tight space... nope..

It’s a great product. I never thought it was bad looking gauge it just that the first one didn’t work, but it’s a wonderful looking gauge. Thank you for the craftsmanship Mr. P.